The Global Leader in High-Power Microwave
sales@microwavetechniques.com Follow on Twitter Follow on LinkedIn
Print Back

WR1500 Waveguide Components



Microwave Techniques manufactures WR1500 Waveguide Components with a wide range of high-power RF products and microwave solutions available.

The products listed below are simply a representation of our standard product line.

We also offer a wide array of custom solutions that are not represented in the list below.

If you do not see the WR1500 waveguide component you require, contact sales@microwavetech.com to discuss your exact requirements with a technical sales engineer.

Please note all product data, specifications, and descriptions are subject to change at the sole discretion of Microwave Techniques and must be confirmed at the time of order.
WR1500
Unit of Measure
Items 79930-1
79930-1
WR1500 (R6) Waveguide Socket Flange 		11244-1
11244-1
WR1500 (R6) Waveguide Thru Flange 		11296-701
11296-701
WR1500 (R6) Waveguide H-Plane Sweep Bend 		11295-702
11295-702
WR1500 (R6) Waveguide E-Plane Sweep Bend 		11594-000
11594-000
WR1500 (R6) Waveguide E-Plane Miter Bend
Product # N/A 79930-1 N/A 11244-1 N/A 11296-701 N/A 11295-702 N/A 11594-000
Waveguide Size N/A WR1500 (R6)
Coaxial Size N/A
Configuration N/A N/A N/A Sweep (H-Plane) N/A Sweep (E-Plane) N/A Miter Bend (E-Plane)
Flange Type N/A Flange (Socket) N/A Flange (Thru) N/A N/A N/A
Frequency N/A N/A N/A 492-749 MHz N/A 492-749 MHz N/A 492-749 MHz
Bandwidth N/A
Bandwidth N/A N/A N/A 257 MHz N/A 257 MHz N/A 5% Bandwidth
VSWR N/A N/A N/A 1.05:1 N/A 1.05:1 N/A 1.03:1
Load VSWR N/A
Sidearm VSWR N/A
Transition VSWR N/A
Pressure N/A N/A N/A 0.25 psig N/A 0.25 psig N/A 0.25 psig
Pressure N/A
Pressure N/A
Max Coolant Pressure N/A
Waveguide Pressure N/A
Wall N/A 0.125 in N/A 0.125 in N/A N/A N/A
Dimensional Drawing N/A
N/A
N/A
Waveguide Sweep Bends - Dimensions
 		N/A
Waveguide Sweep Bends - Dimensions
 		N/A
Waveguide Miter Bends - Dimensions
Length A N/A N/A N/A 33 in N/A 15 in N/A 9 in
Length N/A
Length B N/A
Power1 N/A N/A N/A 236 MW (Peak), 422 KW (Average) at 492 MHz 335 MW (Peak), 572 KW (Average) at 749 MHz N/A 236 MW (Peak), 422 KW (Average) at 492 MHz 335 MW (Peak), 572 KW (Average) at 749 MHz N/A 116 MW (Peak), 422 KW (Average) at 492 MHz 164 MW (Peak), 572 KW (Average) at 749 MHz
Power 12 N/A
Power 2 N/A
Power N/A
Average Power N/A
Peak Power N/A
Material N/A Aluminum
Finish N/A
Finish N/A None N/A None N/A RoHS Compliant Per MIL-DTL-5541 N/A RoHS Compliant Per MIL-DTL-5541 N/A RoHS Compliant Per MIL-DTL-5541
Flange Material N/A
Interface N/A EIA-271 CPRF
Interface - Coax N/A
Interface - Waveguide N/A
Waveguide Interface N/A
Cooling Media N/A
Inlet Temp N/A
Input Temp Tolerance N/A
Minimum Flow Rate N/A
Coolant Fittings N/A
Isolation N/A
Input N/A
Split N/A
Coupler Interface N/A
Directivity N/A
Coupling &commat Center Frequency N/A
Coupling Variation N/A
Coupling N/A
Amplitude Balance N/A
Phase Balance N/A
Minimum Isolation N/A
Direction N/A
Mid-Band Gain (+/- 2 dB) N/A
Weight N/A 5.33 lb N/A 6.12 lb N/A 39.5 lb N/A 23.9 lb N/A 19.5 lb
Paint N/A None N/A None N/A Microwave Techniques Grey N/A Microwave Techniques Grey N/A Microwave Techniques Grey
Marking N/A None N/A None N/A Standard Label Containing PN, SN, QR Code N/A Standard Label Containing PN, SN, QR Code N/A Standard Label Containing PN, SN, QR Code
  • 1
  • 30,000 V/cm Breakdown Voltage
  • Unpressurized Waveguide
  • 1:00:1 VSWR
  • Average power is based upon unpressurized painted aluminum waveguide, internal surface finish of 63µm, under free convective cooling with an operating temperature that is 25oC above ambient temperature. Cooling options should be considered if the waveguide will be operating at higher average power levels - please consult factory.
  • 2
  • 30,000 V/cm Breakdown Voltage
  • Unpressurized Waveguide
  • 1:00:1 VSWR
  • Average power is based upon unpressurized painted aluminum waveguide, internal surface finish of 63µm, under free convective cooling with an operating temperature that is 25oC above ambient temperature. Cooling options should be considered if the waveguide will be operating at higher average power levels - please consult factory.